Final drive motor for a komatsu Final drive motors Travel motor

4 Tips for Final Drive Motor Maintenance

Knowing how to properly care for your final drive motor can keep your equipment functioning properly and extent it’s life. While there are many issues that you can run into with your final drive motor, there are also simple maintenance procedures that you can perform to help eliminate these issues. Read below for some simple maintenance tips that don’t take too long but extend the life of your final drive when done.

Gear Oil

Gear oil should be changed regularly, normally once a year, but it should be checked in between changes. Oil checks should be performed after approximately 100 hours of operation. Ensure that all dirt and debris are removed before checking as these can easily contaminate the gear oil. If the oil appears low refill it, but always follow manufacturers instructions for how full gear oil should be.

Owner’s Manual

The owner’s manual should be your best friend. Certain parts are used and integrated to ensure that final drive motors for bobcats continuously perform as expected. Proper maintenance will be contained in the owner’s manual, therefore you should be completely familiar with it. Majority of problems occurs simply because maintenance procedures outlined in the owner’s manual are not followed and adhered to.

Proper Oil

Using the proper oil is important to extend the life of final drive motors for bobcats or other equipment. There are different oils for different uses, so ensure that you are using the right type. Always refer to the owner’s manual if you are unsure of what type of oil to use. The owner’s manual tells you the recommended type for the parts.

Leaks

Leaks can be a small problem if they are addressed quickly. A simple walk around of the equipment can help detect leaks early before they become bigger problems. Hydraulic liquid can leak or gear oil can leak. Finding the leak is the first step, determining where it’s coming from is the second step and fixing it is the third step.

Knowing proper maintenance schedules is important if you want your equipment to work when needed. Don’t neglect these issues, or your equipment could neglect you when you need it most. Perform regular maintenance to keep larger issues at bay and make repairs cheaper and easier.

Share This : twittergoogle_plusmailby feather

Leave a Reply

Powered by: Wordpress